This example of Ethernet Networking shows a basic ping stack. This example runs on the NB2 with Peripheral Board PB03. The NB2 connects directly to a PC via an Ethernet cable. The IP address in this example is hard coded to 192.168.100.111. The PC needs to have an IP address in this range, for example 192.168.100.1, then it will be able to ping the NB2, with the status showing in the terminal instrument.
The TSK3000, Terminal Instrument, EMAC(32) 10/100, Arbiter and SRAM controller are used in this example.
The embedded project demonstrates a simple ping stack, Ethernet Networking Context, Serial Device I/O Context for serial output via the terminal instrument.
Altium Designer projects included in this download:
- Ethernet_Networking.PrjFpg
- Ethernet_Networking.PrjEmb